Single Tap Beer Cooler Setup
« backOur 1 tap beer cooler / home bar system comes with everything you need to have ice cold draft beer or cider on tap in your pub, bar or home. Can be easily installed in minutes and is also ideal as a mobile beer cooler or temporary draft system. * COLD WATER RECIRC PUMP. *
Included in your package;
Amount of product dispensed with a delta T of 10 degrees C | 55 Pints (31 litres) |
Amount of product dispensed with a delta T of 20 degrees C | 28 Pints (16 litres) |
Cooler type | Shelf |
Cooling type | Air cooled |
Product coils | 1 x 3/8 |
Compressor size | 5cc |
Refrigerant | R134a |
Ice bank size | 2kg |
Waterbath capacity | 5L |
Circulations pump | 1.8m lift |
Supply voltage | 220-240V/50Hz |
Thermostat type | Electro mechanical ice bank thermostat |
Cooling power | 178W |
Weight operational | 22kg |
Dimensions | H=255mm, W=360mm, D=425mm |
Average beer temp 2-4 degrees centigrade
- Approx kit set-up time - 20 minutes
- Average of 2 hours from set-up to being able to drink ice cold beer
- Re-circ ready - Chill right up to the tap (not always available on every cooler please check when ordering)
Beer Taps and Nozzles
- 1x lager and 1x bitter nozzle
- Variflow tap - Adjust the pour speed just the way you like it
- Drip-tray and counter mount attatched to tap - Suitable for all surfaces
- 3/8ths piping from nozzle to base and 50cm tail to attach to cooler
- Due to licensing laws all taps are, and must remain, un-branded
Keg Coupler
A keg coupler is the connection unit that fits onto the keg to allow gas in and beer out of the keg. There are four different types of keg coupler, the type used being dependent on the brewery that has produced the beer. All our our keg couplers come with fittings ready for the pipework to fit. Give us a call on 07936384112 or e-mail info@thebeerdispensershop.com to find out which one is best for you...
Pipes and fittings
Our kits also come supplied with plenty of piping and all the relevant fittings you need.