Double Tap Beer Cooler Setup
« backOur 2 tap beer cooler / home bar system comes with everything you need to have ice cold draft beer or cider on tap in your pub, bar or home. Can be easily installed in minutes and is also ideal as a mobile beer cooler or temporary draft system. * COLD WATER RECIRC PUMP. *
Serves 2 products at once - can be cider, lager or bitter
Included in your package:-
Specifications:
| Standard Features: | |
| 2 x product coils, 5.5m x 9.5 mm (3/8”) O.D. with No 4 pump | |
| Performance: | |
| Nominal icebank pull down:( water 10oC at 24oC ambient) | 2.5 hours |
| Icebank weight | 5.5kg nominal |
| Thermal capacity icebank | 1842kJ (440 kCal) |
| Maximum ambient temperature | 32oC |
| Dimensions: | |
| Height | 285mm |
| Width | 500mm |
| Depth | 455mm |
| Weight: | |
| unloaded | 24.5kg |
| Packed | 25.5kg |
| Operational | 34kg |
| Electrical: | |
| Mains supply | 230v 1ph 50Hz |
| Run current | 2.4A |
| Start current | 16.5A |
| Fuse | 10A |
| Supply | 2m mains cable 3 pin UK Style plug |
| Refrigeration: | |
| Compressor | 8.1cc |
| Compressor starting torque | Low starting torque |
| Compressor duty | (-10oC Evap temp) 350W |
| Evaporator type | Copper/Stainless steel tube |
| Condenser type | Air Cooled – Cu/Al |
| Expansion device | Capillary |
| Refrigerant type charge | R134a refer rating plate |
| Fan Motor: | |
| Speed | 1250rpm |
| Output | 5 Watts |
| Direction | Counter clockwise shaft end |
| Protection | Impedance protected |
| Fan blade Diameter | 200mm |
| Controls: | |
| Control scheme | Fixed setting thermostat |
| Control types | Electromechanical (bellows type) thermostat |
| Python Pump: | |
| Type | Cornelius No4 Pump |
| Output | 25 watts |
| Speed | 2500rpm |
| Protection | Thermal trip |
| Max flow rate @ no pressure | 16 litres per minute |
| Max lift @ min flow | 3.7m |
| Connection size | 9.5mm diameter tube |
| Product coils: | |
| Material | 316 stainless steel |
| Diameter | 9.5mm O.D |
| Length | 5.5m |
| Qty | 2 |
Beer Taps and Nozzles
- 1x lager and 1x bitter nozzle
- Variflow tap - Adjust the pour speed just the way you like it
- Drip-tray and counter mount attatched to tap - Suitable for all surfaces
- 3/8ths piping from nozzle to base and 50cm tail to attach to cooler
- Due to licensing laws all taps are, and must remain, un-branded
Keg Coupler
A keg coupler is the connection unit that fits onto the keg to allow gas in and beer out of the keg. There are four different types of keg coupler, the type used being dependent on the brewery that has produced the beer. All our our keg couplers come with fittings ready for the pipework to fit. Give us a call on 07936384112 or e-mail info@thebeerdispensershop.com to find out which is best for you
Pipes and fittings
Our kits come supplied with plenty of piping and all the relevant fittings you need.
Customer Reviews
Write an online review and share your thoughts with other shoppers!
Reviewer: Maria from Portsmouth
Very good quality we had a wedding reception we were very please as groom could pour his own pint which was freezing cold had great fun with it. Would highly recommend!
